- No products in the cart.
Head roll bar
$30.00Dimensions: 520mm (l) x 280mm (h) - 26mm Tube
3 mounting holes - 200mm Distance apart
New advanced front chassis w/ suspension
$330.00Upgrade for Drift II (Generic Go kart / buggy) Mount hole distance (eye - eye): 245mm Overall dimensions: 850mm x 440mm x 350mm Stub axle thickness: 15mm Suspension (eye -...
Middle frame chassis (Extended size)
$220.00Dimensions: 1140mm (l) x 660(w) x 360 (h) Rear swing mounting diameter: 12mm Rear swing mount distance: 535mm (outer) 435mm (inner) Front stub thread diameter: 16mm Front stub thickness: 20mm Front...
Rear frame chassis
$160.00Fit for 270cc 9.0hp (wet clutch) engine mounting Does not include axle and swing bearings (frame only) Overall dimensions: 650mm (l) x 600mm (w) x 320mm (h) Rear swing mount distance: 530mm...
Basic front rigid chassis (hand controls)
$110.00
Dimensions: 660mm (l) x 200mm (h)
Mounting hole distance: 245mm
Available in Gloss black
Half cage
$220.00Complete Half attachment 4 frames / Shoulder guards / Leg guards / Steering rack guard / Bolts / Nuts Available in multiple colours - Standard gloss black otherwise specify your choice Available only for Extended...
Steering column rack mount
$25.00Two types available Tall/Short (370mm/320mm) x Width 170mm Lower hole mount diameter: 10mm (2) Upper hole mount length: 60mm Please specify which height you want otherwise you will be issued...
Basic front rigid chassis (foot controls)
$110.00
Dimensions: 660mm (l) x 200mm (h)
Mounting hole distance: 245mm
Available in Gloss black
Middle frame chassis (Regular size)
$180.00Dimensions: 1000mm (l) x 660(w) x 360 (h) Rear swing mounting diameter: 12mm Rear swing mount distance: 530mm (outer) 435mm (inner) Front stub thread diameter: 16mm Front stub thickness: 20mm Front...
Front bumper - Bull bar guard
$69.00Quantity: 1pc
Dimensions: 820mm (l) x 185mm (w)
Thickness: 35mm
Mounting hole distance: 245mm
Typical application: Rigid go kart / Drift II
Side step bumper - Bull guard
$42.00Fit for: Middle frame chassis (Left side / Right side)
Contents: 1pcLength: 495mm Width: 185mmThickness: 38mm
Can be welded onto custom projects
Quad ATV Control arm pair (x2)
$110.00Quad ATV complete control arm set
Bottom control arm x1 (265L x 168W)mm
Upper control arm x1 (210L x 168W)mm
Advanced Control arm set (x4)
$100.00Advanced chassis complete control arm set
Bottom control arm x2
Upper control arm x2
Rear frame chassis w/ blank plate
$180.00Blank chassis install your own engine. Ideal for stationary engines up to 15hp Does not include axle and swing bearings (frame only) Overall dimensions: 650mm (l) x 600mm (w) x 320mm (h)...
Quad ATV Control arm set (x4)
$200.00Quad ATV complete control arm set
Bottom control arm x2 (265L x 168W)mm
Upper control arm x2 (210L x 168W)mm
Kinroad Control arm pair (x2)
$100.00Kinroad control arm pair
Bottom control arm x1 (142mm mounting points)
Upper control arm x1 (142mm mounting points)
Kinroad Control arm set (x4)
$190.00Kinroad complete control arm set
Bottom control arm x2 (142mm mounting points)
Upper control arm x2 (142mm mounting points)
Advanced Control arm pair (x2)
$50.00Advanced chassis complete control arm set
Bottom control arm x1
Upper control arm x1
Advanced Lower bottom control arm
$30.00Control arm for advanced chassis - 1pc
Application - Lower mounting
Advanced Top upper control arm
$25.00Control arm for advanced chassis - 1pc
Application - Upper top mounting
Front chassis - Advanced frame
$240.00Upgrade for Drift II (Generic Go kart / buggy) Mount hole distance (eye - eye): 245mm Overall dimensions: 850mm x 440mm x 350mm Stub axle thickness: 15mm Suspension (eye -...
