Axle length: 870mm Tapered Bearing mount size - 25mm Sprocket / Disc carrier hub - 23Teeth Rim / Wheel hub - 17Teeth Typical application: Helmetkarts Go kart range    ...

Pair (x2) 6205RS bearing Fit for rear axle spline

Quantity: Pair (x2) Studs: 3x78mm PCD  Inner diameter: 17 Teeth Hub face diameter: 95mm Hub length: 39mm Mounting thread M10 Available in Gold / Black 

Upgrade for Drift II (Generic Go kart / buggy)  Mount hole distance (eye - eye): 245mm Overall dimensions:  850mm x 440mm x 350mm Stub axle thickness: 15mm Suspension (eye -...

Complete roll cage attachment  3 frames / Weather shade cover / Foam padding / Material sleeves / Bolts / Nuts Available only in Gloss black  Available for regular or extended...

Quantity: 2pcs (pair) Studs: 3x78mm PCD  Inner diameter: 15mm or/ 17mm  Select bearing diameter upon checkout Hub face diameter: 95mm Hub length: 68mm Mounting thread M10

Pitch: 428 Teeth size: 60T 4 Stud - Bolt distance: 68mm (accross) Inner diameter: 50mm   

Dimensions:  520mm (l) x 280mm (h) - 26mm Tube  3 mounting holes - 200mm Distance apart 

Quantity: 2pcs (pair) 3 stud rim mount  Inner spline 17 Teeth Mounting hole distance 50mm Mounting thread M8 Hub face diameter 75mm Hub face thickness 9mm

Brake calliper bracket Mounting hole distance - approx. 62mm

Used for Larger chains  Sizes: 420, 428, 520, 525, 530, 530

Axle length: 890mm Axle diameter: 25mm  Spline teeth: 19T

Quantity: Pair (x2)  Stub length: 68mm Stub diameter: 17mm  Tie rod joint hole diameter: 10mm A arm / Ball joint distance (upper to lower): 62mm Fit for: Drum brake hub(s)...

Front subframe - Advanced model 

Dimensions: 1000mm (l) x 660(w) x 360 (h) Rear swing mounting diameter: 12mm  Rear swing mount distance: 530mm (outer) 435mm (inner)  Front stub thread diameter: 16mm Front stub thickness: 20mm Front...

Fit for 270cc 9.0hp (wet clutch) engine mounting  Does not include axle and swing bearings (frame only)    Overall dimensions: 650mm (l) x 600mm (w) x 320mm (h) Rear swing mount distance: 530mm...

Quantity: Pair (x2)  Stub length: 80mm Stub diameter: 15mm Stub thread: 12mm Overall length 350mm Brake caliper mount hole distance: 52mm Application: Advanced frame go kart

Quantity: 1pcs Studs: 4x68mm PCD  Inner diameter: 23 Teeth Select bearing diameter upon checkout Hub face diameter: 82mm Hub length: 36mm Mounting thread M10

Overall dimensions (LxWxH) - approx. 325mm x 190mm x 240mm Inner dimensions (WxH) - approx. 265mm x 175mm

Dimensions (LxWxH) - approx. 240mm x 160mm x 170mm Machined 6061-T6 High grade aluminium

Stainless steel Inner dimensions (WxH) - approx. 160mm x 230mm Overall dimensions (WxH) - approx. 170mm x 245mm

Dimensions (LxWxH) - approx. 150mm x 90mm x 90mm

Brake calliper bracket Mounting hole distance - approx. 40mm

Material Thickness = 6mmHeight Inside C    = 48mmWidth across Back = 40mmDistance Back to Front of Rad. = 40mmFrom Back to hole centre = 25mmOverall Height = 60mm

Material Thickness = 6mmHeight Inside C    = 54mmWidth across Back = 40mmDistance from Back to Front of Rad. = 48mmFrom Back to hole centre = 28mmOverall Height = 66mm

30mm light axle collar clamp Centre diameter - approx. 30mm  

30mm axle collar clamp Centre diameter - approx. 30mm Overall diameter - approx. 55mm

25mm axle collar clamp Centre diameter - approx. 25mm Overall diameter - approx. 50mm

Quantity: 1pcs Overall height: 115mm Width across unit: 40mm  Distance Back to Front of Rad. 118mm From back to front: 35mm Mounting hole distance: 80mm Material thickness: 3mm  

Used for smaller chains  Sizes: 6 , 7 , 8 , 9 , 10 

  Alloy engine mount clamps   

Flat engine mount Size available in: 28mm x 90mm  28mm x 92mm 30mm x 90mm 30mm x 92mm Fits chassis size - 28mm or 30mm x 92mm or 90mm rail...

Aluminium sliding engine mount CNC Machined

Aluminium sliding engine mount Anti-vibration CNC Machined

Aluminium sliding engine mount CNC Machined

Quantity: 1pc Dimensions: 820mm (l) x 185mm (w) Thickness: 35mm Mounting hole distance: 245mm  Typical application: Rigid go kart / Drift II     

Fit for: Middle frame chassis (Left side / Right side)  Contents: 1pcLength: 495mm  Width: 185mmThickness: 38mm Can be welded onto custom projects

Blank chassis install your own engine.  Ideal for stationary engines up to 15hp Does not include axle and swing bearings (frame only)    Overall dimensions: 650mm (l) x 600mm (w) x 320mm (h)...

Quantity: Pair (x2)  Stub length: 95mm Stub diameter: 17mm  Fit for: Drum brake hub(s) Applications: 150 - 250cc Quad bike(s)

Quantity: Pair (2pcs)Converts 3 Stud / 50mm to 3 Stud / 78mm Hub face thickness: 8mm

Quantity: Pair (2pcs)Converts 3 Stud / 50mm to 4 Stud / 110mm (across)  Hub face thickness: 8mm

Upper control arm x1   (210L x 168W)mm

Bottom control arm x1  (265L x 168W)mm  

Quad ATV complete control arm set  Bottom control arm x1  (265L x 168W)mm Upper control arm x1   (210L x 168W)mm

Quad ATV complete control arm set  Bottom control arm x2  (265L x 168W)mm Upper control arm x2   (210L x 168W)mm

Lower control arm x1

Lower control arm x2 Upper control arm x2

Lower control arm x1   (142mm mounting points)

Upper control arm x1   (142mm mounting points)

Kinroad control arm pair Bottom control arm x1  (142mm mounting points) Upper control arm x1   (142mm mounting points)

Kinroad complete control arm set  Bottom control arm x2  (142mm mounting points) Upper control arm x2   (142mm mounting points)

Advanced chassis complete control arm set  Bottom control arm x1 Upper control arm x1

Lower control arm x1 Upper control arm x1

Inner spline 27mm (24Teeth)  Quantity: Pair (x2) 4 stud rim mount  Mounting hole distance across 135mm Mounting hole distance nearest 94 Mounting hole diameter 10mm       

Quantity: 2pcs (pair) Studs: 4x110mm PCD  Inner diameter: 23 Teeth Hub face diameter: 128mm Hub length: 35mm Mounting thread M10

Quantity: Pair (x2) 3 stud rim mount  Inner spline 25mm (23Teeth)  Mounting hole distance 78mm Mounting thread M8 Hub face diameter 95mm Hub face thickness 6.5mm Overall width 39mm

Quantity: 2pcs (pair) 3 stud rim mount  Inner spline 25mm (23Teeth)  Mounting hole distance 50mm Mounting thread M8 Hub face diameter 75mm Hub face thickness 9mm

Quantity: Pair (x2) 3 Stud - 10mm Mounting hole Distance between mounting hole (across) - 60mm Diameter of centre hole - 15mm

Quantity: Pair (x2) 3 Stud - 10mm Mounting hole Distance between mounting hole (across) - 78mm Diameter of centre hole bearing - 15mm

Quantity: 2pcs (pair) Studs: 4x110mm PCD  Inner diameter: 15mm  Hub face diameter: 128mm Hub length: 68mm Mounting thread M10

Pitch: 530 Teeth size: 32T 6 Stud - Bolt distance: 27mm (nearest hole to hole) Inner diameter: 37mm  Overall Diameter: 170mm  

Pitch: 25H Teeth size: 67T 3 Stud - Bolt distance: 33mm (nearest hole to hole) Inner diameter: 28mm  Overall Diameter: 140mm  

Pitch: 520 Teeth size: 43T 4 Stud - Bolt distance: 64mm (nearest hole to hole) Inner diameter: 58mm  Overall Diameter: 230mm  

Pitch: 428 Teeth size: 40T 6 Stud - Bolt distance: 55mm (accross) Inner diameter: 37mm  Overall Diameter: 155mm  

Pitch: 428 Teeth: 41 4 Stud - Bolt distance: 68mm (accross) Inner diameter: 50mm  Overall diameter: 170mm  

Pitch: 428 Teeth size: 40T 6 Stud - Bolt distance: 55mm (accross) Inner diameter: 37mm  Overall Diameter: 155mm  

Pitch: 428 Teeth size: 37T 4 Stud - Bolt distance: 89mm (accross) Inner diameter: 76mm  Overall Diameter: 155mm  

Pitch: 428 Teeth: 41 4 Stud - Bolt distance: 90mm (accross) Inner diameter: 76mm  Overall diameter: 170mm    

Pitch: 420 Teeth size: 37T 4 Stud - Bolt distance: 89mm (accross) Inner diameter: 76mm  Overall Diameter: 155mm  

Pitch: 420 Teeth: 41 4 Stud - Bolt distance: 89mm (accross) Inner diameter: 76mm  Overall diameter: 170mm    

Pitch: 420 Teeth size: 37T 4 Stud - Bolt distance: 89mm (accross) Inner diameter: 58mm  Overall Diameter: 155mm  

Pitch: 428 Teeth size: 48T 4 Stud - Bolt distance: 89mm (accross) Inner diameter: 76mm  Overall Diameter: 200mm  

Pitch: 428 Teeth size: 48T 4 Stud - Bolt distance: 89mm (accross) Inner diameter: 90mm  Overall Diameter: 200mm  

Pitch: 420 Teeth: 41 4 Stud - Bolt distance: 68mm (accross) Inner diameter: 50mm  Overall diameter: 170mm  

Quantity: Pair (x2) Tapered stub diameter:  20mm / 17mm Stub length: 89mm Stub thread: M14 Caliper mounting distance: 64mm Overall height: 400mm (370mm w/out Dust cap) Typical application: 250cc Sahara dune buggy

Quantity: Pair (x2) Stub diameter - 17mm  Typical application: 110cc Kandi dune buggy  

Pair (x2)  Stub length - 60mm Stub diameter - 15mm 

Quantity: Pair (x2)  Stub length: 65mm Stub diameter:17mm  Caliper mounting holes: 52mm Stub thread: M12 A arm mounting distance (upper to lower): 135mm A arm mounting distance (width): 52mm Application:...

Axle length: 830mm Axle diameter: 25mm  Splined: 23T Fit for: Mini Jeep

Axle length: 1050mm Axle diameter: 30mm  Spline teeth: 23T

Axle length: 1050mm Axle diameter: 30mm  Spline teeth: 24T Typical application: Kandi 150cc Buggy

Quantity: Pair (x2)  Stub length: 98mm Caliper mounting holes distance: 63mm Stub diameter: 17mm to 17.50mm, 20.00mm, 21.90mm (Tapered step down)  Fit for: Disc brake hub(s) Applications: 150 - 250cc Quad...

Quantity: 1pcs Studs: 3x78mm PCD  Inner diameter: 17mm  Select bearing diameter upon checkout Hub face diameter: 94mm Hub length: 78mm Rotor studs: 6x50mm PCD Mounting thread M10 Available in Gold or/...

Quantity: Pair (x2) Left / Right  Studs: 4x110mm PCD  Inner diameter: 17mm Hub face diameter: 128mm

Quantity: Pair (x2) Left / Right  Studs: 4x78mm PCD  Inner diameter: 17mm Hub face diameter: 100mm

Front and Left hubs (Pair)x2 4 Stud / 87mm Distance apart (across) Inner stub diameter hole - 18mm 

Quantity: One (1) 4 Stud wheel mount / 4 Lug brake rotor carrier Distance between nearest hub mounting holes - 61mm Distance crossing hub mounting holes -  87mm Distance between nearest...

Quantity: One (1) 4 Stud wheel hub / 6 Lug rotor carrier Distance between nearest hub mounting holes -  61mm Distance crossing hub mounting holes - 87mm Distance between nearest...

Advanced chassis complete control arm set  Bottom control arm x2  Upper control arm x2

Control arm for advanced chassis - 1pc Application - Lower mounting 

Control arm for advanced chassis - 1pc Application - Upper top mounting 

Upgrade for Drift II (Generic Go kart / buggy)  Mount hole distance (eye - eye): 245mm Overall dimensions:  850mm x 440mm x 350mm Stub axle thickness: 15mm Suspension (eye -...

Pair (x2) 6202RS bearing Fit for rear axle spline 

Two types available Tall/Short (370mm/320mm)  x Width 170mm Lower hole mount diameter: 10mm (2) Upper hole mount length: 60mm   Please specify which height you want otherwise you will be issued...

Dimensions: 1140mm (l) x 660(w) x 360 (h) Rear swing mounting diameter: 12mm  Rear swing mount distance: 535mm (outer) 435mm (inner)  Front stub thread diameter: 16mm Front stub thickness: 20mm Front...

Dimensions: 660mm (l) x 200mm (h) Mounting hole distance: 245mm  Available in Gloss black 

Dimensions: 660mm (l) x 200mm (h) Mounting hole distance: 245mm  Available in Gloss black 

Quantity: Pair (x2) Overall dimensions: 35mm (l) x 110mm (w) x 41mm (h) Stub length: 55mm Stub axle height: 40mm Stub diameter: 15mm Stub thread: 12mm Bearings: 6001rs (x4)  Application: Basic rigid chassis...

Links:100Size: 35 PitchMaterial: MetalColor: Dark Gray   Includes master link.Links can be removed to fit virtually any application.

Size: 415 112 Link Includes master link Material: Metal

Size: 520H 120Link Includes master link Material: Metal

Quantity: 2pcs (pair) Studs: 3x78mm PCD  Inner diameter: 23 Teeth Hub face diameter: 105mm Hub length: 48mm Mounting thread M10

Pitch: 420 Teeth size: 60T 4 Stud - Bolt distance: 68mm (across) Inner diameter: 48mm   

Quantity: 1pcs Inner spline 23T  Mounting hole distance (across) - 68mm Mounting hole distance (nearest) - 47mm Mounting thread M10 Hub face thickness 6mm Hub face diameter 80mm Hub height 41mm...

Quantity: Pair (x2) 3 stud - Hub mount Inner diameter 22mm Key way 6mm Mounting hole distance 78mm Mounting thread M10  

Axle length: 700mm Axle thickness: 25mm  Bearing seat: 20mm Splined hub mount: 16 Teeth Typical application: Quad bike

Quantity: Pair (2pcs)Converts 4 Stud / 100mm to 4 Stud / 110mm (across)  Hub face thickness: 8mm

Quantity: Pair (x2) 3 stud rim mount  Inner diameter 25mm Mounting hole distance 50mm Mounting thread M10 Keyway size 8mm  CNC - Gold finish 

Quantity: Pair (x2) 3 stud rim mount  Inner diameter 40mm Mounting hole distance 50mm Mounting thread M10 Keyway size 8mm  CNC - Gold finish 

Quantity: 1pc Studs: 3x50mm PCD  Inner diameter: 30mm Hub face diameter: 70mm Hub length: 61mm Mounting thread M10 Keyway size 8mm CNC - Gold finish 

Quantity: Pair (x2) 3 stud rim mount  Inner diameter 40mm Mounting hole distance 50mm Mounting thread M10 Keyway size 8mm  CNC - Gold finish 

Quantity: Pair (x2)  Stub length: 110mm Tapered stub diameter: 20mm / 17mm Stub thread: 12mm Overall length 260mm

Quantity: Pair (x2) 3 Stud - 10mm Threaded mounting hole Distance between mounting hole (across) - 78mm Diameter of inner bearing - 17mm Diameter of outer bearing - 20mm

Axle length: 620mm Tapered Bearing mount size - 20mm Sprocket / Disc carrier hub - 23Teeth Rim / Wheel hub - 17Teeth Typical application: Drift trike, Go kart, Buggy  ...

Quantity: Pair (x2)  Stub length: 63mm Stub diameter: 17mm  Caliper mount bolt distance: 63mm Tie rod hole joint diameter: 10mm A arm / Ball joint distance (upper to lower): 65mm...

Axle length: 860mm  Bearing mount size: 20mm Rim / Wheel hub: Diameter 16mm / Key way 5mm Typical application: Kinroad 110cc Buggy      

Axle length: 850mm  Includes: Sprocket / Rotor carrier  *This unit requires welding* Bearing mount size: 25mm Rim / Wheel hub: 23T Typical application: Custom  

Axle length: 870mm Solid splined  Bearing mount size - 25mm Sprocket / Disc carrier hub - 23Teeth Rim / Wheel hub - 23Teeth Typical application: Helmetkarts Go kart range *Commercial...

Complete Half attachment  4 frames / Shoulder guards / Leg guards / Steering rack guard / Bolts / Nuts Available in multiple colours - Standard gloss black otherwise specify your choice Available only for Extended...

Quantity: Pair (x2)  Stub length: 65mm Stub diameter:17mm  Caliper mounting holes: 52mm Stub thread: M12 Stub axle height: 82mm Application: Disc brake hubs

Quantity: Pair (x2)  Stub length: 67mm Stub diameter: 17mm  Stub thread: M12 Stub axle height: 82mm A arm mounting distance (Upper to Lower): 135mm A arm mounting distance (Width): 52mm...

Quantity: Pair (x2)  Stub length: 67mm Stub diameter: 17mm  Stub thread: M12 Stub axle height: 82mm Application: Drum brake hubs

Pitch: 35 Teeth size: 58T 6 Stud - Bolt distance: 33mm (across) Inner diameter: 29mm  Overall Diameter: 180mm  

Pitch: 530 Teeth size: 37T 4 Stud Pattern Bolt distance: 57mm (nearest) Bolt distance: 79.5mm (crossing) Inner diameter: 58mm  Overall Diameter: 195mm