- No products in the cart.
Close
428 Chain - (Cut to size)
$27.00Links: 110 / 116 / 136 / 140Size: 420Material: MetalColor: Dark Gray / Gold Includes master link.Links can be removed to fit any application.
870mm / 25mm Splined axle (A)
$85.00Axle length: 870mm Tapered Bearing mount size - 25mm Sprocket / Disc carrier hub - 23Teeth Rim / Wheel hub - 17Teeth Typical application: Helmetkarts Go kart range ...
3 Stud / 78mm / 17T Rear wheel hub
$39.99Quantity: Pair (x2)
Studs: 3x78mm PCD
Inner diameter: 17 Teeth
Hub face diameter: 95mm
Hub length: 39mm
Mounting thread M10
Available in Gold / Black
Close
428 / 50mm Sprocket (Various sizes)
$19.00Pitch: 428
Various sizes (Teeth) available
4 Stud - Bolt distance: 68mm (accross)
Inner diameter: 50mm
New advanced front chassis w/ suspension
$330.00Upgrade for Drift II (Generic Go kart / buggy) Mount hole distance (eye - eye): 245mm Overall dimensions: 850mm x 440mm x 350mm Stub axle thickness: 15mm Suspension (eye -...
Close
420 Chain - Various sizes (Cut to size)
$25.00Size: 420Material: MetalColor: Dark Gray Includes master link.Links can be removed to fit virtually any application.
3 Stud / 78mm / 15 - 17mm Front wheel hub
$39.99Quantity: 2pcs (pair)
Studs: 3x78mm PCD
Inner diameter: 15mm or/ 17mm
Select bearing diameter upon checkout
Hub face diameter: 95mm
Hub length: 68mm
Mounting thread M10
428 / 60T / 50mm Sprocket
$45.00Pitch: 428
Teeth size: 60T
4 Stud - Bolt distance: 68mm (accross)
Inner diameter: 50mm
Head roll bar
$30.00Dimensions: 520mm (l) x 280mm (h) - 26mm Tube
3 mounting holes - 200mm Distance apart
3 Stud / 50mm / 17T Rear wheel hub
$39.99Quantity: 2pcs (pair)
3 stud rim mount
Inner spline 17 Teeth
Mounting hole distance 50mm
Mounting thread M8
Hub face diameter 75mm
Hub face thickness 9mm
Close
4 Stud / 110mm / 6 Lug rotor carrier Front wheel hub
$45.00Quantity: 1pcs
Studs: 4x110mm PCD
Inner diameter: 15mm or/ 17mm
Select bearing diameter upon checkout
Hub face diameter: 134mm
Hub length: 64mm
Rotor studs: 6x58mm PCD
Mounting thread M10
Close
420 / 50mm Sprocket (Various sizes)
$19.00Pitch: 420
Various sizes (Teeth) available
4 Stud - Bolt distance: 68mm (accross)
Inner diameter: 50mm
17mm Stub axle C - Drum brake (pair) x2
$55.00Quantity: Pair (x2) Stub length: 68mm Stub diameter: 17mm Tie rod joint hole diameter: 10mm A arm / Ball joint distance (upper to lower): 62mm Fit for: Drum brake hub(s)...
Middle frame chassis (Regular size)
$180.00Dimensions: 1000mm (l) x 660(w) x 360 (h) Rear swing mounting diameter: 12mm Rear swing mount distance: 530mm (outer) 435mm (inner) Front stub thread diameter: 16mm Front stub thickness: 20mm Front...
Rear frame chassis
$160.00Fit for 270cc 9.0hp (wet clutch) engine mounting Does not include axle and swing bearings (frame only) Overall dimensions: 650mm (l) x 600mm (w) x 320mm (h) Rear swing mount distance: 530mm...
15mm Ball joint stub axle - Disc brake (pair) x2
$110.00Quantity: Pair (x2)
Stub length: 80mm
Stub diameter: 15mm
Stub thread: 12mm
Overall length 350mm
Brake caliper mount hole distance: 52mm
Application: Advanced frame go kart
