- No products in the cart.
Close
428 Chain - (Cut to size)
$27.00Links: 110 / 116 / 136 / 140Size: 420Material: MetalColor: Dark Gray / Gold Includes master link.Links can be removed to fit any application.
870mm / 25mm Splined axle (A)
$85.00Axle length: 870mm Tapered Bearing mount size - 25mm Sprocket / Disc carrier hub - 23Teeth Rim / Wheel hub - 17Teeth Typical application: Helmetkarts Go kart range ...
3 Stud / 78mm / 17T Rear wheel hub
$39.99Quantity: Pair (x2)
Studs: 3x78mm PCD
Inner diameter: 17 Teeth
Hub face diameter: 95mm
Hub length: 39mm
Mounting thread M10
Available in Gold / Black
Close
428 / 50mm Sprocket (Various sizes)
$19.00Pitch: 428
Various sizes (Teeth) available
4 Stud - Bolt distance: 68mm (accross)
Inner diameter: 50mm
New advanced front chassis w/ suspension
$330.00Upgrade for Drift II (Generic Go kart / buggy) Mount hole distance (eye - eye): 245mm Overall dimensions: 850mm x 440mm x 350mm Stub axle thickness: 15mm Suspension (eye -...
Close
420 Chain - Various sizes (Cut to size)
$25.00Size: 420Material: MetalColor: Dark Gray Includes master link.Links can be removed to fit virtually any application.
3 Stud / 78mm / 15 - 17mm Front wheel hub
$39.99Quantity: 2pcs (pair)
Studs: 3x78mm PCD
Inner diameter: 15mm or/ 17mm
Select bearing diameter upon checkout
Hub face diameter: 95mm
Hub length: 68mm
Mounting thread M10
428 / 60T / 50mm Sprocket
$45.00Pitch: 428
Teeth size: 60T
4 Stud - Bolt distance: 68mm (accross)
Inner diameter: 50mm
Head roll bar
$30.00Dimensions: 520mm (l) x 280mm (h) - 26mm Tube
3 mounting holes - 200mm Distance apart
3 Stud / 50mm / 17T Rear wheel hub
$39.99Quantity: 2pcs (pair)
3 stud rim mount
Inner spline 17 Teeth
Mounting hole distance 50mm
Mounting thread M8
Hub face diameter 75mm
Hub face thickness 9mm
Close
4 Stud / 110mm / 6 Lug rotor carrier Front wheel hub
$45.00Quantity: 1pcs
Studs: 4x110mm PCD
Inner diameter: 15mm or/ 17mm
Select bearing diameter upon checkout
Hub face diameter: 134mm
Hub length: 64mm
Rotor studs: 6x58mm PCD
Mounting thread M10
Close
420 / 50mm Sprocket (Various sizes)
$19.00Pitch: 420
Various sizes (Teeth) available
4 Stud - Bolt distance: 68mm (accross)
Inner diameter: 50mm
17mm Stub axle C - Drum brake (pair) x2
$55.00Quantity: Pair (x2) Stub length: 68mm Stub diameter: 17mm Tie rod joint hole diameter: 10mm A arm / Ball joint distance (upper to lower): 62mm Fit for: Drum brake hub(s)...
Middle frame chassis (Regular size)
$180.00Dimensions: 1000mm (l) x 660(w) x 360 (h) Rear swing mounting diameter: 12mm Rear swing mount distance: 530mm (outer) 435mm (inner) Front stub thread diameter: 16mm Front stub thickness: 20mm Front...
Rear frame chassis
$160.00Fit for 270cc 9.0hp (wet clutch) engine mounting Does not include axle and swing bearings (frame only) Overall dimensions: 650mm (l) x 600mm (w) x 320mm (h) Rear swing mount distance: 530mm...
15mm Ball joint stub axle - Disc brake (pair) x2
$110.00Quantity: Pair (x2)
Stub length: 80mm
Stub diameter: 15mm
Stub thread: 12mm
Overall length 350mm
Brake caliper mount hole distance: 52mm
Application: Advanced frame go kart
4 Stud / 67mm / 23T Axle hub carrier (A)
$19.99Quantity: 1pcs
Studs: 4x68mm PCD
Inner diameter: 23 Teeth
Select bearing diameter upon checkout
Hub face diameter: 82mm
Hub length: 36mm
Mounting thread M10
Battery hold down tray
$99.95Overall dimensions (LxWxH) - approx. 325mm x 190mm x 240mm
Inner dimensions (WxH) - approx. 265mm x 175mm
Battery tray mount - Aluminium
$99.95Dimensions (LxWxH) - approx. 240mm x 160mm x 170mm
Machined 6061-T6 High grade aluminium
Tie down battery cradle holder
$58.50Stainless steel
Inner dimensions (WxH) - approx. 160mm x 230mm
Overall dimensions (WxH) - approx. 170mm x 245mm
48mm C section stub axle holder
$67.50Material Thickness = 6mmHeight Inside C = 48mmWidth across Back = 40mmDistance Back to Front of Rad. = 40mmFrom Back to hole centre = 25mmOverall Height = 60mm
54mm C section stub axle holder
$75.00Material Thickness = 6mmHeight Inside C = 54mmWidth across Back = 40mmDistance from Back to Front of Rad. = 48mmFrom Back to hole centre = 28mmOverall Height = 66mm
30mm Axle collar clamp
$20.0030mm axle collar clamp
Centre diameter - approx. 30mm
Overall diameter - approx. 55mm
25mm Axle collar clamp
$18.5025mm axle collar clamp
Centre diameter - approx. 25mm
Overall diameter - approx. 50mm
30 - 50mm Axle hanger bracket
$55.00
Quantity: 1pcs
Overall height: 115mm
Width across unit: 40mm
Distance Back to Front of Rad. 118mm
From back to front: 35mm
Mounting hole distance: 80mm
Material thickness: 3mm
Flat engine mount
$130.00Flat engine mount Size available in: 28mm x 90mm 28mm x 92mm 30mm x 90mm 30mm x 92mm Fits chassis size - 28mm or 30mm x 92mm or 90mm rail...
Sliding engine mount (Anti-vibration)
$240.00Aluminium sliding engine mount
Anti-vibration
CNC Machined
Front bumper - Bull bar guard
$69.00Quantity: 1pc
Dimensions: 820mm (l) x 185mm (w)
Thickness: 35mm
Mounting hole distance: 245mm
Typical application: Rigid go kart / Drift II
Side step bumper - Bull guard
$42.00Fit for: Middle frame chassis (Left side / Right side)
Contents: 1pcLength: 495mm Width: 185mmThickness: 38mm
Can be welded onto custom projects
Rear frame chassis w/ blank plate
$180.00Blank chassis install your own engine. Ideal for stationary engines up to 15hp Does not include axle and swing bearings (frame only) Overall dimensions: 650mm (l) x 600mm (w) x 320mm (h)...
17mm Stub axle D - Drum brake (pair) x2
$66.00Quantity: Pair (x2)
Stub length: 95mm
Stub diameter: 17mm
Fit for: Drum brake hub(s)
Applications: 150 - 250cc Quad bike(s)
