- No products in the cart.
New advanced front chassis w/ suspension
$330.00Upgrade for Drift II (Generic Go kart / buggy) Mount hole distance (eye - eye): 245mm Overall dimensions: 850mm x 440mm x 350mm Stub axle thickness: 15mm Suspension (eye -...
15mm Ball joint stub axle - Disc brake (pair) x2
$110.00Quantity: Pair (x2)
Stub length: 80mm
Stub diameter: 15mm
Stub thread: 12mm
Overall length 350mm
Brake caliper mount hole distance: 52mm
Application: Advanced frame go kart
Advanced Control arm set (x4)
$100.00Advanced chassis complete control arm set
Bottom control arm x2
Upper control arm x2
Middle frame chassis (Extended size)
$220.00Dimensions: 1140mm (l) x 660(w) x 360 (h) Rear swing mounting diameter: 12mm Rear swing mount distance: 535mm (outer) 435mm (inner) Front stub thread diameter: 16mm Front stub thickness: 20mm Front...
Front bumper - Bull bar guard
$69.00Quantity: 1pc
Dimensions: 820mm (l) x 185mm (w)
Thickness: 35mm
Mounting hole distance: 245mm
Typical application: Rigid go kart / Drift II
Head roll bar
$30.00Dimensions: 520mm (l) x 280mm (h) - 26mm Tube
3 mounting holes - 200mm Distance apart
15mm Basic stub axle (pair) x2
$45.00Quantity: Pair (x2) Overall dimensions: 35mm (l) x 110mm (w) x 41mm (h) Stub length: 55mm Stub axle height: 40mm Stub diameter: 15mm Stub thread: 12mm Bearings: 6001rs (x4) Application: Basic rigid chassis...
17mm Stub axle C - Drum brake (pair) x2
$55.00Quantity: Pair (x2) Stub length: 68mm Stub diameter: 17mm Tie rod joint hole diameter: 10mm A arm / Ball joint distance (upper to lower): 62mm Fit for: Drum brake hub(s)...
Middle frame chassis (Regular size)
$180.00Dimensions: 1000mm (l) x 660(w) x 360 (h) Rear swing mounting diameter: 12mm Rear swing mount distance: 530mm (outer) 435mm (inner) Front stub thread diameter: 16mm Front stub thickness: 20mm Front...
Rear frame chassis
$160.00Fit for 270cc 9.0hp (wet clutch) engine mounting Does not include axle and swing bearings (frame only) Overall dimensions: 650mm (l) x 600mm (w) x 320mm (h) Rear swing mount distance: 530mm...
Battery hold down tray
$99.95Overall dimensions (LxWxH) - approx. 325mm x 190mm x 240mm
Inner dimensions (WxH) - approx. 265mm x 175mm
Battery tray mount - Aluminium
$99.95Dimensions (LxWxH) - approx. 240mm x 160mm x 170mm
Machined 6061-T6 High grade aluminium
Tie down battery cradle holder
$58.50Stainless steel
Inner dimensions (WxH) - approx. 160mm x 230mm
Overall dimensions (WxH) - approx. 170mm x 245mm
48mm C section stub axle holder
$67.50Material Thickness = 6mmHeight Inside C = 48mmWidth across Back = 40mmDistance Back to Front of Rad. = 40mmFrom Back to hole centre = 25mmOverall Height = 60mm
54mm C section stub axle holder
$75.00Material Thickness = 6mmHeight Inside C = 54mmWidth across Back = 40mmDistance from Back to Front of Rad. = 48mmFrom Back to hole centre = 28mmOverall Height = 66mm
30mm Axle collar clamp
$20.0030mm axle collar clamp
Centre diameter - approx. 30mm
Overall diameter - approx. 55mm
25mm Axle collar clamp
$18.5025mm axle collar clamp
Centre diameter - approx. 25mm
Overall diameter - approx. 50mm
30 - 50mm Axle hanger bracket
$55.00
Quantity: 1pcs
Overall height: 115mm
Width across unit: 40mm
Distance Back to Front of Rad. 118mm
From back to front: 35mm
Mounting hole distance: 80mm
Material thickness: 3mm
Flat engine mount
$130.00Flat engine mount Size available in: 28mm x 90mm 28mm x 92mm 30mm x 90mm 30mm x 92mm Fits chassis size - 28mm or 30mm x 92mm or 90mm rail...
Sliding engine mount (Anti-vibration)
$240.00Aluminium sliding engine mount
Anti-vibration
CNC Machined
Side step bumper - Bull guard
$42.00Fit for: Middle frame chassis (Left side / Right side)
Contents: 1pcLength: 495mm Width: 185mmThickness: 38mm
Can be welded onto custom projects
Rear frame chassis w/ blank plate
$180.00Blank chassis install your own engine. Ideal for stationary engines up to 15hp Does not include axle and swing bearings (frame only) Overall dimensions: 650mm (l) x 600mm (w) x 320mm (h)...
17mm Stub axle D - Drum brake (pair) x2
$66.00Quantity: Pair (x2)
Stub length: 95mm
Stub diameter: 17mm
Fit for: Drum brake hub(s)
Applications: 150 - 250cc Quad bike(s)
Quad ATV Control arm pair (x2)
$110.00Quad ATV complete control arm set
Bottom control arm x1 (265L x 168W)mm
Upper control arm x1 (210L x 168W)mm
Quad ATV Control arm set (x4)
$200.00Quad ATV complete control arm set
Bottom control arm x2 (265L x 168W)mm
Upper control arm x2 (210L x 168W)mm
Kinroad Control arm pair (x2)
$100.00Kinroad control arm pair
Bottom control arm x1 (142mm mounting points)
Upper control arm x1 (142mm mounting points)
Kinroad Control arm set (x4)
$190.00Kinroad complete control arm set
Bottom control arm x2 (142mm mounting points)
Upper control arm x2 (142mm mounting points)
Advanced Control arm pair (x2)
$50.00Advanced chassis complete control arm set
Bottom control arm x1
Upper control arm x1
Tapered Ball joint stub - Large (pair) x2
$260.00Quantity: Pair (x2)
Tapered stub diameter: 20mm / 17mm
Stub length: 89mm
Stub thread: M14
Caliper mounting distance: 64mm
Overall height: 400mm (370mm w/out Dust cap)
Typical application: 250cc Sahara dune buggy
17mm Ball joint stub axle - Small (Pair) x2
$180.00Quantity: Pair (x2)
Stub diameter - 17mm
Typical application: 110cc Kandi dune buggy
17mm Stub axle A - Disc brake (pair) x2
$50.00Quantity: Pair (x2) Stub length: 65mm Stub diameter:17mm Caliper mounting holes: 52mm Stub thread: M12 A arm mounting distance (upper to lower): 135mm A arm mounting distance (width): 52mm Application:...
17mm Stub axle D - Disc brake (pair) x2
$66.00Quantity: Pair (x2) Stub length: 98mm Caliper mounting holes distance: 63mm Stub diameter: 17mm to 17.50mm, 20.00mm, 21.90mm (Tapered step down) Fit for: Disc brake hub(s) Applications: 150 - 250cc Quad...
Advanced Lower bottom control arm
$30.00Control arm for advanced chassis - 1pc
Application - Lower mounting
Advanced Top upper control arm
$25.00Control arm for advanced chassis - 1pc
Application - Upper top mounting
Front chassis - Advanced frame
$240.00Upgrade for Drift II (Generic Go kart / buggy) Mount hole distance (eye - eye): 245mm Overall dimensions: 850mm x 440mm x 350mm Stub axle thickness: 15mm Suspension (eye -...
17mm Stub axle B - Disc brake (pair) x2
$45.00Quantity: Pair (x2)
Stub length: 65mm
Stub diameter:17mm
Caliper mounting holes: 52mm
Stub thread: M12
Stub axle height: 82mm
Application: Disc brake hubs
Steering column rack mount
$25.00Two types available Tall/Short (370mm/320mm) x Width 170mm Lower hole mount diameter: 10mm (2) Upper hole mount length: 60mm Please specify which height you want otherwise you will be issued...
Tapered Ball joint stub axle (pair) x2
$140.00Quantity: Pair (x2)
Stub length: 110mm
Tapered stub diameter: 20mm / 17mm
Stub thread: 12mm
Overall length 260mm
17mm Stub axle A - Drum brake (pair) x2
$50.00Quantity: Pair (x2) Stub length: 67mm Stub diameter: 17mm Stub thread: M12 Stub axle height: 82mm A arm mounting distance (Upper to Lower): 135mm A arm mounting distance (Width): 52mm...
Basic front rigid chassis (hand controls)
$110.00
Dimensions: 660mm (l) x 200mm (h)
Mounting hole distance: 245mm
Available in Gloss black
Half cage
$220.00Complete Half attachment 4 frames / Shoulder guards / Leg guards / Steering rack guard / Bolts / Nuts Available in multiple colours - Standard gloss black otherwise specify your choice Available only for Extended...
17mm Stub axle B - Drum brake (pair) x2
$45.00Quantity: Pair (x2)
Stub length: 67mm
Stub diameter: 17mm
Stub thread: M12
Stub axle height: 82mm
Application: Drum brake hubs
Basic front rigid chassis (foot controls)
$110.00
Dimensions: 660mm (l) x 200mm (h)
Mounting hole distance: 245mm
Available in Gloss black
17mm Stub axle C - Disc brake (pair) x2
$62.00Quantity: Pair (x2) Stub length: 63mm Stub diameter: 17mm Caliper mount bolt distance: 63mm Tie rod hole joint diameter: 10mm A arm / Ball joint distance (upper to lower): 65mm...
