- No products in the cart.
Traditional circle race steering wheel
$49.00
Overall diameter: 300mm
Steering wheel mount holes: 6mm holes (3) / 35mm apart
Rubber grip / center plastic dust cap w/ alignment guide
Fit for: Foot control setup
Basic foot pedals (L/R) pair
$30.00Quantity: 2pcs (L/R) Includes: Rubber slip-on sleeve Fit for hydraulic brake / Cable accelerator (foot control setup) Overall dimensions: 170mm x 48mm x 40mmPedal rest dimensions: 65mm x 48mm Brake lever...
Advanced Foot Hydraulic brake w/ reservoir Go kart 10mm
$70.00Hydraulic foot pedal brake (complete setup)
master cylinder / hose / caliper / pads
Hose length: approx 1600mm
Master cylinder mount holes: 480mm
Caliper mount holes: 630mm
Tie rods (set)
$39.00Long tie rod length 630mm
Short tie rod length 320mm
Tie rod thickness 12mm
Inner eye fitting M10
Close
Steering shaft w/ collar fittings + bottom plate
$39.00Shaft Overall length 730mm Column thickness 15mm Mounting face diameter 59mm Mounting hole distance 35mm Mounting thread M8 Collars Inner diameter 14mm Collar length 34mm Collar mounting hole M10...
Steering column shaft
$25.00Overall length 730mm
Column thickness 15mm
Mounting face diameter 59mm
Mounting hole distance 35mm
Mounting thread M8
Hydraulic hand brake
$70.00Hydraulic hand lever brake (complete setup)
master cylinder / hose / caliper / pads
Hose length: approx 1600mm
Master cylinder mount holes: 480mm
Caliper mount holes: 630mm
Hand gear lever shifter - Heavy duty
$42.50Heavy duty steel
Forward and Reverse shifter
Return spring included
3 Stud / 160mm Brake disc
$15.00
3 Stud / 160mm overall diameter
Center diameter - approx. 47mm
Thickness - 3.00mm
Distance nearest mounting hole to hole approx. 50mm
Close
10mm Hydraulic hose (various lengths)
$13.00Available lengths: 320 / 420 / mm
Banjo bolt diameter: 10mm
Close
3 stud / 138mm Brake disc rotor
$13.003 Stud / 138mm overall diameter
Center diameter - 37.00mm
Thickness - 3.00mm
Distance nearest mounting hole to hole approx. 40.50mm
4 Stud / 160mm Brake disc rotor
$19.00Multi stud / 160mm overall diameter
Center diameter - 50.00mm
4 Lug pattern
Mount hole size - approx. 8mm
Mounting hole distance - approx. 70mm (across)
Thickness - approx. 5mm
Advanced foot pedals (L/R) pair
$30.00Quantity: 2pcs (L/R) Fit for hydraulic brake setup / Cable accelerator (Foot control) Pedal dimensions: 145mm x 80mm x 15mm Inner mount distance: 45mm Outer mount distance: 90mm Mounting hole...
Pair (x2) Foot pedal rubber
$15.00Foot pedal rubber grips
Dimensions 80mm (l) x 50mm (w)
Thickness 15mm
Mechanical Park brake lever
$47.50Mechanical override park brake setup
Push button lever
Zinc coated
Rust proof / Wear resistant
Dimensions: 350mm x 120mm
Hand gear lever shifter w/ cover
$39.00Forward and Reverse shifter
Rubber cover + Return spring included
Extended foot pedals (L/R) pair
$40.00Quantity: 2pcs (L/R) Includes: Extension barFit for hydraulic brake / Cable accelerator (foot control setup) Overall dimensions: 190mm x 120mm x 40mmPedal rest dimensions: 190mm x 120mm Extension bar dimensions: 100mm x 90mmBrake lever...
Pinion rack - Large 920mm - 1000mm
$170.00Assembled w/ Tie Rod complete length: 920mm - 1000mm Steering column length: 195mm Steering column housing: 42mm w/ bearing Steering link shaft length: 480mm Steering travel (Left to Right): 70mm...
Pinion rack - Medium 850mm - 920mm
$150.00Assembled w/ Tie Rod complete length: 850 - 920mm Steering column length: 195mm Steering column housing: 42mm w/ bearing Steering link shaft length: 480mm Steering travel (Left to Right): 70mm...
Hand lever Hydraulic Master cylinder vertical reservoir Go kart - 10mm Banjo
$30.00Handle bar size - approx. 22mm
Banjo bolt diameter - approx. 10mm
3 stud / 190mm Brake Disc
$25.00
3 Stud / 190mm overall diameter
Center diameter - approx. 45mm
Thickness - 3.00mm
Distance nearest mounting hole to hole approx. 50mm
4 stud / 180mm Brake Disc
$17.00
4 Stud / 180mm overall diameter
Center diameter - approx. 40mm
Thickness - 3.00mm
Distance across mounting hole to hole approx. 60mm
4 Stud / 180mm Brake disc
$18.00
4 Stud / 180mm overall diameter
Center diameter - approx. 48mm
Thickness - 3.00mm
Distance across mounting hole to hole approx. 68mm
3 stud / 160mm Brake Disc
$17.00
3 Stud / 180mm overall diameter
Center diameter - approx. 58mm
Thickness - 3.00mm
Distance nearest mounting hole to hole approx. 70mm
Mini buggy foot pedals (L/R) pair
$65.00
Pedal(s) - Foot control pedals
Application - For foot control setup
Quantity: 2pcs (L/R)
Hydraulic brake calliper (A)
$35.00
Quantity: 1pcs
Mounting hole distance - approx. 50mm
Banjo bolt size - 10mm
Close
