- No products in the cart.
270cc Stationary Engine - 9.0HP
$499.00Unleaded stationary engine w/ 2:1 Reduction wet clutch gearboxMax Power Output: 9hp/3600rpm (Governed to 1800rpm)Displacement: 270ccBore x Stroke (mm): 77 x 58Max Torque (n.m)/rpm] : 18.5/2600Ignition system: Transistor Electric /...
125cc Engine - Manual
$370.00Displacement: 125cc Single cylinder 4 Stroke Gearbox: Manual Gearing: Neutral 0 / Forward 1, 2, 3, 4 Clutch type: Wet clutch Cooling system: Air Ignition Mode: CDI Start Mode: Kick start Compression ratio:...
32mm Chrome alloy exhaust muffler
$45.00Length of muffler (body) - approx. 290mm
Diameter of mounting hole - approx. 32mm
Pull starter recoil - GX160 GX200
$30.00Stationary engines such as Mowers, Generators, Water pumps etc.
Honda GX160 / GX200 and Chinese Stationary engines
5.5HP / 6.5HP
3 stud Starter motor for 50cc - 125cc
$45.00Starter motor fit for - 50cc, 70cc, 90cc, 110cc, 125cc
3 Stud
Mounting hole distance (side) - approx. 72mm
Mounting hole distance (bottom) - approx. 82mm
270cc Air filter housing + Filter
$40.00Complete air filter housing and carburetor mount
Foam filter and fittings included
Fit for 270cc engines
Exhaust muffler Gasket - GX240 to GX390
$12.50 Fit for: GX240 / GX270 / GX340 / GX390
Quantity: 1pc (Pair)
Rebuild kit - Small engine GX160 GX200
$48.00Fit for: GX160 / GX200
Includes:
1x piston 5x rings 2x circlips 1x pin 7x gaskets 2x crankcase oil seal 1x carburetor Insulator
33 - 80cc Pull starter
$16.40Fit for 33, 36, 43, 49, 80cc
Distance of nearest mounting holes - 67mm
Distance of across diagonal mounting holes - 95mm
Pull starter recoil - GX270
$40.00Quantity: 1PC
Replacement application: GX270 Stationary Engine
9HP / 11HP Engines
Specify colour at checkout: Black / Red
250cc Zongshen Engine - Manual
$740.00Displacement: 250cc Single cylinder 4 Stroke Gearbox: Manual Gearing: Forward 1 / Neutral 0 / Forward 2, 3, 4, 5 Clutch type: Wet clutch Cooling system: Air Ignition Mode: CDI Start Mode: Combo...
Starter motor for GY6
$35.00Starter motor fit for - GY6 motors
Mounting hole distance - approx. 68mm
9 Tooth
2 stud Starter motor for 50cc - 125cc
$45.00Starter motor fit for - 50cc, 70cc, 90cc, 110cc, 125cc
2 Stud
Mounting hole distance - approx. 68mm
Radiator overflow bottle 200ml
$30.00Dimensions (L x H x W) - 60mm x 90mm x 80mm
Holds - approx. 200ml
Radiator overflow bottle 150ml
$35.00Dimensions (L x H x W) - 78mm x 75mm x 48.5mm
Holds - approx. 150ml
Comes w/ mount bracket kit
Engine Oil Cooler Kit Radiator / Medium
$65.00Oil cooler size - approx. 103mm x 250 mm
Mounting hole distance (centre to centre) - approx. 44mm
CNC Engine Oil Cooler Kit Radiator / Small
$58.50Oil cooler size - approx. 76mm x 132 mm Mounting hole distance (centre to centre) - approx. 45mm Brake line length - approx. 420mm Available colours - Green, Silver, Gold,...
250cc Engine - Manual w/ reverse
$870.00Displacement: 250cc Single cylinder 4 Stroke Gearbox: Manual Gearing: Reverse -1 / Neutral 0 / Forward 1, 2, 3, 4 Clutch type: Wet clutch Cooling system: Air Ignition Mode: CDI Start Mode: Electric Compression ratio:...
150cc GY6 Engine - Automatic
$440.00Displacement: 150cc Single cylinder 4 Stroke Gearbox: Automatic CVT Clutch type: Wet clutch Cooling system: Air Ignition Mode: CDI Start Mode: Combo (Electric / Kick) Petrol type: Unleaded Maximum power: 6KW Bore x Stroke: 52...
160cc Engine - Manual
$840.00Displacement: 160cc Single cylinder 4 Stroke Gearbox: Manual Gearing: Forward 1 / Neutral 0 / Forward 2, 3, 4 Clutch type: Wet clutch Cooling system: Air & Oil (cooler not supplied) Ignition...
190cc Zongshen Engine - Manual
$1,060.00Displacement: 190cc Single cylinder 4 Stroke Gearbox: Manual Gearing: Forward 1 / Neutral 0 / Forward 2, 3, 4, 5 Clutch type: Wet clutch Cooling system: Air & Oil (cooler not supplied)...
150cc LIFAN Engine - Manual
$585.00Displacement: 150cc Single cylinder 4 Stroke Gearbox: Manual Gearing: Neutral 0 / Forward 1, 2, 3, 4 Clutch type: Wet clutch Cooling system: Air Ignition Mode: CDI Start Mode: Kick start Compression ratio:...
Close
140cc Engine - Manual
$560.00Displacement: 140cc Single cylinder 4 Stroke Gearbox: Manual Gearing: Neutral 0 / Forward 1, 2, 3, 4 Clutch type: Wet clutch Cooling system: Air + Oil Ignition Mode: CDI Start Mode: Kick start...
125cc LIFAN Engine - Manual
$390.00Displacement: 125cc Single cylinder 4 Stroke Gearbox: Manual Gearing: Neutral 0 / Forward 1, 2, 3, 4 Clutch type: Wet clutch Cooling system: Air Ignition Mode: CDI Start Mode: Kick start Compression ratio:...
150cc Engine - Semi Automatic w/ Reverse
$545.00Displacement: 150cc Single cylinder 4 Stroke Gearbox: Semi - Automatic Gearing: Forward 1, 2, 3 / Neutral / Reverse Clutch type: Wet clutch Cooling system: Air Ignition Mode: CDI Start Mode: Electric Compression...
125cc Engine - Semi Automatic w/ Reverse
$410.00Displacement: 125cc Single cylinder 4 Stroke Gearbox: Semi - Automatic Gearing: Forward 1, 2, 3 / Neutral / Reverse Clutch type: Wet clutch Cooling system: Air Ignition Mode: CDI Start Mode: Electric Compression...
125cc Engine - Automatic w/ Reverse
$390.00Displacement: 125cc Single cylinder 4 Stroke Gearbox: Automatic Gearing: Forward / Neutral / Reverse Clutch type: Wet clutch Cooling system: Air Ignition Mode: CDI Start Mode: Electric Compression ratio: 9:1 Petrol type:...
110cc Engine - Automatic
$360.00Displacement: 110cc Single cylinder 4 Stroke Gearbox: Automatic Clutch type: Wet clutch Cooling system: Air Ignition Mode: CDI Start Mode: Electric Drive: Forward Max. Power: 5HP/6000r/min Compression ratio: 9:1 Petrol type: Unleaded...
Close
80cc Engine - 5.0HP
$180.00Single cylinder, air-cooled, crankcase scavenging, 2 Stroke Ignition Mode: CDI Max. Power: 5HP/6000r/min Compression ratio: 7:1 Total Rotational Transmission ratio: 16:1 Starting: Electric Start and Pull Start Gas Tank capacity: 2L...
80cc Engine w/ Electric start - 5.0HP
$250.00Single cylinder, air-cooled, crankcase scavenging, 2 Stroke Ignition Mode: CDI Electric start Max. Power: 5HP/6000r/min Compression ratio: 7:1 Total Rotational Transmission ratio: 16:1 Starting: Electric Start and Pull Start Gas Tank...
80cc Engine - 3.0HP
$320.00Model 152F-3Type: Single Cylinder 4 Stroke OHVDisplacement: 79.4cm3Bore X Stroke: 52 X 37.4Power Output: 1.1kw/3600RPmMax Torque: 3.1nm / 3240RPMFuel Consumption: 450G/KWHCooling system: Forced airHorsepower: 3.0PTO Shaft: Rotation CounterclockwiseDry weight: 9.2Kg
49cc Engine - Performance Blue
$180.00Displacement: 49ccCentrifugal Reduction Dry ClutchWeight: 3.8kgSingle cylinder 2 stroke Bottom Mounting Distance (Width): 85mmBottom Mounting Distance (Length): 67mmStart Mode: Hand pull starter 6T sprocket High performance cylinder head, plug, powder coated metal...
49cc Engine - Performance Red
$180.00Displacement: 49ccCentrifugal Reduction Dry ClutchWeight: 3.8kgSingle cylinder 2 stroke Bottom Mounting Distance (Width): 85mmBottom Mounting Distance (Length): 67mmStart Mode: Hand pull starter 6T sprocket High performance cylinder head, plug, powder coated metal...
49cc Engine - Reduction gearbox
$145.00Displacement: 49ccCentrifugal Reduction Dry ClutchWeight: 4.6kgSingle cylinder 2 stroke Bottom Mounting Distance (Width): 85mmBottom Mounting Distance (Length): 67mmStart Mode: Hand pull starter T8F Sprocket
49cc Engine - Standard dry clutch
$98.00Displacement: 49ccCentrifugal Dry ClutchWeight: 3.2kgSingle cylinder 2 stroke Bottom Mounting Distance (Width): 85mmBottom Mounting Distance (Length): 67mmStart Mode: Hand pull starter 25H - 7 teeth Sprocket
49cc Stationary Engine - 2.5HP
$265.00Brand: HUASHENG 142F
Single cylinder, air-cooled, 4 strokeDisplacement: 49ccIgnition: C.D.I. ignitionMax.output:1.2KW @ 6800rpmMax.torque: 2.0NM @ 4500rpmEconomy: 100 km/3.5 litre fuelMax speed: 40km/hFuel tank: 2.5 litresEngine Weight: 5.5 kg
49cc Engine
$139.0049cc single cylinder, air-cooled, 2-stroke Fuel: 25:1 gasoline / engine oil mixPiston Diameter: 44MMTop Mounting Brackets: 11cm Bottom Mounting Brackets: 10.3cm Top Through Hole Diameter M.B.: 0.161" Bottom Through Hole Diameter M.B.: 0.245" Exhaust Diameter:...
Radiator setup - Large w/ fan and bottle
$179.00Water cooler dimensions: 320mm x 202mm x 115mm Lower mounting hole distance (left to right) 70mm Top center mounting point Thermo fan and radiator bottle setup Tubing and fittings included...
