- No products in the cart.
250cc Zongshen Engine - Manual
$740.00Displacement: 250cc Single cylinder 4 Stroke Gearbox: Manual Gearing: Forward 1 / Neutral 0 / Forward 2, 3, 4, 5 Clutch type: Wet clutch Cooling system: Air Ignition Mode: CDI Start Mode: Combo...
Wet clutch plates
$45.00
2 x Clutch Friction Plates
2 x Clutch Plates
1 x Friction Plate with Pins
Application: 200cc - 270cc Wetclutch system(s)
270cc Stationary Engine - 9.0HP
$499.00Unleaded stationary engine w/ 2:1 Reduction wet clutch gearboxMax Power Output: 9hp/3600rpm (Governed to 1800rpm)Displacement: 270ccBore x Stroke (mm): 77 x 58Max Torque (n.m)/rpm] : 18.5/2600Ignition system: Transistor Electric /...
Pull starter recoil - GX160 GX200
$30.00Stationary engines such as Mowers, Generators, Water pumps etc.
Honda GX160 / GX200 and Chinese Stationary engines
5.5HP / 6.5HP
Carburetor - Fit for GX160 GX200
$30.00Fit for our 200cc 6.5HP engines
Also suitable for: Honda GX160 / GX200 and Chinese Stationary engines
3L Custom Petrol tank
$42.00Includes cap and mounting bracket
Capacity 3L
Dimensions:
295mm (l) x 175mm (w) x 190mm (h)
Replacement fuel tank filter
$8.00Quantity: 1pc Engine fitments: GX120 GX160 GX200 GX240 GX270 GX340 GX390 168F 172F 188F Replace Part Numbers: 16955ZE1010,16955-ZE1-000,9500202080, 91353671003 Fit For 3/16" ID fuel line Fuel line size: ID x...
3/8" Chrome universal fuel filter (Small)
$18.50Fits - 5/16" hose
Length - approx. 85mm
Outside diameter - approx. 26mm
3 stud Starter motor for 50cc - 125cc
$45.00Starter motor fit for - 50cc, 70cc, 90cc, 110cc, 125cc
3 Stud
Mounting hole distance (side) - approx. 72mm
Mounting hole distance (bottom) - approx. 82mm
1" (25.4mm) 428 pitch / 14T Centrifugal dry clutch
$65.00Shaft - approx. 1" (25.4mm)
Cog - 428 pitch / 14T
Close
Wet clutch Assembly Basket / Plates
$85.00Drive Sprocket Comp. Basket1 x Clutch Pressure Plate2 x Clutch Friction Plates2 x Clutch PlatesWeight assembly
Close
270cc Air filter housing + Filter
$40.00Complete air filter housing and carburetor mount
Foam filter and fittings included
Fit for 270cc engines
Torque Converter Case Dust cover
$24.99Material: Plastic
Finish: Matte black
Fits: Torque converter clutch setup
428 / 13T / 22mm Wet clutch cog
$27.50Wet clutch cog
Inner diameter: 22mm
Neck length: 15mm
6mm keyway
428 Pitch
13T
Fit for: GX240 / GX270 / GX390
(Wet-clutch shaft output)
Torque Converter 1" (25.4mm)
$150.00Complete Torque converter kit Suits standard 25.4mm (1”) drive shaft 5/8” bore driven pully 6” Diameter Drive Belt: 3/4″ Top Width – Asymmetrical Keyway 6mm Aluminium mounting back plate +...
Exhaust muffler Gasket - GX240 to GX390
$12.50 Fit for: GX240 / GX270 / GX340 / GX390
Quantity: 1pc (Pair)
Rebuild kit - Small engine GX160 GX200
$48.00Fit for: GX160 / GX200
Includes:
1x piston 5x rings 2x circlips 1x pin 7x gaskets 2x crankcase oil seal 1x carburetor Insulator
10T 420P Torque converter Sprocket cog
$32.50Torque converter cog
10T
420 Pitch
5mm Keyway
Centre diameter - approx. 15mm
12T 35P Torque converter Sprocket cog
$43.50Torque converter cog
12T
35 Pitch
5mm Keyway
Centre diameter - approx. 15mm
428 / 13T / 22mm Wet clutch cog
$27.50Wet clutch cog
Inner diameter: 22mm
Neck length: 25mm
7mm keyway
428 Pitch
13T
Fit for: GX240 / GX270 / GX390
(Wet-clutch shaft output)
428 / 13T / 20mm Wet clutch cog
$26.00Wet clutch cog
Inner diameter: 20mm
Neck length: 25mm
5mm keyway
428 Pitch
13T
Fit for: GX140 / GX160 / GX200
(Wet-clutch shaft output)
Close
Close
Close
Close
Close
Close
Fuel line - Black (Various sizes)
$19.00Hose Type: Fuel / AirButyronitrile RubberColor: Yellow
Available sizes:Diameter:（ ID * OD）3x6mm, 4x6mm, 4x7mm, 5x8mm, 6x9mm, 6x10mm, 8x12mm.
Close
Fuel line - Yellow (Various sizes)
$2.20Hose Type: Fuel / AirPolyurethaneColor: Yellow Available lengths: 1ft (0.3m)3ft (1.0m)10ft (3.0m)20ft (6.0m)50ft (15.0m) Available sizes:0.08" x 0.14" (2mm x 3.5mm)1/8" x 1/4" (3mm x 6mm)1/8" x 3/16" (3mm x 5mm) 3/32"...
5 Meter Braided line AN-6 Black w/ fittings
$98.00Hose Type: AN Stainless Steel PU (Polyurethane)Pressure Rating: 1000 Working PSI / 5000 Burst PSITemperature Rating: -73°C to + 260°C Length: 5 Meters AN - 6Inside Diameter: 8.3 mm (5/16") Outside...
Close
1 Meter Braided line - AN (Various sizes)
$21.50Hose Type: AN Stainless Steel PU (PolyurethanPressure Rating: 1000 Working PSI / 5000 Burst PSITemperature Rating: -73°C to + 260°C Sizes available: AN - 3 , 4 , 6 ,...
