Displacement: 250cc Single cylinder 4 Stroke  Gearbox: Manual Gearing: Forward 1 / Neutral 0 / Forward 2, 3, 4, 5 Clutch type: Wet clutch Cooling system: Air  Ignition Mode: CDI Start Mode: Combo...

  2 x Clutch Friction Plates 2 x Clutch Plates 1 x Friction Plate with Pins Application: 200cc - 270cc Wetclutch system(s)  

Unleaded stationary engine w/ 2:1 Reduction wet clutch gearboxMax Power Output: 9hp/3600rpm (Governed to 1800rpm)Displacement: 270ccBore x Stroke (mm): 77 x 58Max Torque (n.m)/rpm] : 18.5/2600Ignition system: Transistor Electric /...

Stationary engines such as Mowers, Generators, Water pumps etc.  Honda GX160 / GX200 and Chinese Stationary engines 5.5HP / 6.5HP

Fit for our 200cc 6.5HP engines  Also suitable for: Honda GX160 / GX200 and Chinese Stationary engines

Includes cap and mounting bracket Capacity 3L Dimensions:  295mm (l) x 175mm (w) x 190mm (h)

Quantity: 1pc Fits GX270 / GX390 Wet clutch

Quantity: 1pc Engine fitments: GX120 GX160 GX200 GX240 GX270 GX340 GX390 168F 172F 188F  Replace Part Numbers: 16955ZE1010,16955-ZE1-000,9500202080, 91353671003 Fit For 3/16" ID fuel line Fuel line size: ID x...

Fits - 5/16" hose Length - approx. 85mm Outside diameter - approx. 26mm

Starter motor fit for - 50cc, 70cc, 90cc, 110cc, 125cc 3 Stud Mounting hole distance (side) - approx. 72mm Mounting hole distance (bottom) - approx. 82mm

Shaft - approx. 1" (25.4mm) Cog - 428 pitch / 14T

Dimensions:  230mm (l) x 130mm (w) x 220mm (h) Capacity 3.6L

Complete air filter housing and carburetor mount Foam filter and fittings included Fit for 270cc engines 

Material: Plastic  Finish: Matte black  Fits: Torque converter clutch setup 

Wet clutch cog Inner diameter: 22mm Neck length: 15mm 6mm keyway 428 Pitch 13T Fit for: GX240 / GX270 / GX390 (Wet-clutch shaft output)

17T Diameter - approx. 115mm  

Diameter - approx. 115mm  

67T 5 Plate Diameter - approx. 120mm  

Complete Torque converter kit  Suits standard 25.4mm (1”) drive shaft 5/8” bore driven pully 6” Diameter Drive Belt: 3/4″ Top Width – Asymmetrical Keyway 6mm Aluminium mounting back plate +...

 Fit for: GX160 / GX200 Quantity: 1pc (set)

 Fit for: GX240 / GX270 / GX340 / GX390 Quantity: 1pc (Pair)

Fit for: GX160 / GX200 Includes:  1x piston 5x rings 2x circlips 1x pin 7x gaskets 2x crankcase oil seal 1x carburetor Insulator

Quantity: 1pc Fits GX160 / GX200

Quantity: 1pc Fits GX270

Quantity: 1pc Fits GX160 / GX200 Wet clutch

Front sprocket cog 14T 428 Pitch 12 Spline  

Torque converter cog 10T 420 Pitch 5mm Keyway Centre diameter - approx. 15mm

Torque converter cog 12T 35 Pitch 5mm Keyway Centre diameter - approx. 15mm

16T 530 Pitch 24 Spline Fits - GY6 Motors

Wet clutch cog Inner diameter: 22mm Neck length: 25mm 7mm keyway 428 Pitch 13T Fit for: GX240 / GX270 / GX390 (Wet-clutch shaft output)

Wet clutch cog Inner diameter: 20mm Neck length: 25mm 5mm keyway 428 Pitch 13T Fit for: GX140 / GX160 / GX200 (Wet-clutch shaft output)

Fits - 3/8" hose Length - approx. 85mm Outside diameter - approx. 26mm

Hose Type: AN Stainless Steel PU (Polyurethane)Pressure Rating: 1000 Working PSI / 5000 Burst PSITemperature Rating: -73°C to + 260°C Length: 5 Meters   AN - 6Inside Diameter: 8.3 mm (5/16") Outside...

Fits - 6mm or 8mm hose Length - approx. 110mm Outside diameter - approx. 50mm

Fits - 5/16" hose Length - approx. 106mm Outside diameter - approx. 26mm

Fits - 6.3mm hose

Dimensions:  230mm (l) x 130mm (w) x 220mm (h) Capacity 6L

Fits - 8mm fuel line 150LPH 12 volts  

Fit for 33, 36, 43, 49, 80cc Distance of nearest mounting holes - 67mm  Distance of across diagonal mounting holes - 95mm 

Fits - 8mm fuel line 130LPH 12 volts Included: 1 x Fuel Pump 1 x Filter 4 x Clamps 2 x Black Rubber hose 2 x Black Hose Fittings 2 x Red Oil Outlet Hose 2 x...

Fits - 1/4" fuel line 1 Fuel pump (x1) Pair fuel filter (x2)

Quantity:  1PC Replacement application: GX270 Stationary Engine 9HP / 11HP Engines Specify colour at checkout: Black / Red

Starter motor fit for - GX340, GX390 14 Teeth  

Starter motor fit for - GY6 motors Mounting hole distance - approx. 68mm 9 Tooth

Starter motor fit for - 50cc, 70cc, 90cc, 110cc, 125cc 2 Stud Mounting hole distance - approx. 68mm

Starter motor fit for - GX240, GX270

Starter motor fit for - GX160, GX200

Dimensions (L x H x W) - 60mm x 90mm x 80mm Holds - approx. 200ml  

Dimensions (L x H x W) - 78mm x 75mm x 48.5mm Holds - approx. 150ml Comes w/ mount bracket kit

Oil cooler size - approx. 103mm x 250 mm Mounting hole distance (centre to centre) - approx. 44mm  

Oil cooler size - approx. 76mm x 132 mm Mounting hole distance (centre to centre) - approx. 45mm Brake line length - approx. 420mm Available colours - Green, Silver, Gold,...

Displacement: 250cc Single cylinder 4 Stroke  Gearbox: Manual Gearing: Reverse -1 / Neutral 0 / Forward 1, 2, 3, 4 Clutch type: Wet clutch Cooling system: Air  Ignition Mode: CDI Start Mode: Electric Compression ratio:...

Displacement: 150cc Single cylinder 4 Stroke  Gearbox: Automatic CVT Clutch type: Wet clutch Cooling system: Air  Ignition Mode: CDI Start Mode: Combo (Electric / Kick) Petrol type: Unleaded Maximum power: 6KW Bore x Stroke: 52...

Displacement: 160cc Single cylinder 4 Stroke  Gearbox: Manual Gearing: Forward 1 / Neutral 0 / Forward 2, 3, 4 Clutch type: Wet clutch Cooling system: Air & Oil (cooler not supplied) Ignition...

Displacement: 190cc Single cylinder 4 Stroke  Gearbox: Manual Gearing: Forward 1 / Neutral 0 / Forward 2, 3, 4, 5 Clutch type: Wet clutch Cooling system: Air & Oil (cooler not supplied)...

Displacement: 150cc Single cylinder 4 Stroke  Gearbox: Manual Gearing: Neutral 0 / Forward 1, 2, 3, 4 Clutch type: Wet clutch Cooling system: Air  Ignition Mode: CDI Start Mode: Kick start Compression ratio:...

Displacement: 125cc Single cylinder 4 Stroke  Gearbox: Manual Gearing: Neutral 0 / Forward 1, 2, 3, 4 Clutch type: Wet clutch Cooling system: Air Ignition Mode: CDI Start Mode: Kick start Compression ratio:...

Displacement: 125cc Single cylinder 4 Stroke  Gearbox: Manual Gearing: Neutral 0 / Forward 1, 2, 3, 4 Clutch type: Wet clutch Cooling system: Air Ignition Mode: CDI Start Mode: Kick start Compression ratio:...

Displacement: 150cc Single cylinder 4 Stroke  Gearbox: Semi - Automatic Gearing: Forward 1, 2, 3 / Neutral / Reverse Clutch type: Wet clutch Cooling system: Air Ignition Mode: CDI Start Mode: Electric Compression...

Displacement: 125cc Single cylinder 4 Stroke  Gearbox: Semi - Automatic Gearing: Forward 1, 2, 3 / Neutral / Reverse Clutch type: Wet clutch Cooling system: Air Ignition Mode: CDI Start Mode: Electric Compression...

Displacement: 125cc Single cylinder 4 Stroke  Gearbox: Automatic  Gearing: Forward / Neutral / Reverse Clutch type: Wet clutch Cooling system: Air Ignition Mode: CDI Start Mode: Electric Compression ratio: 9:1 Petrol type:...

Displacement: 110cc Single cylinder 4 Stroke  Gearbox: Automatic Clutch type: Wet clutch Cooling system: Air Ignition Mode: CDI Start Mode: Electric Drive: Forward Max. Power: 5HP/6000r/min Compression ratio: 9:1 Petrol type: Unleaded...

Single cylinder, air-cooled, crankcase scavenging, 2 Stroke Ignition Mode: CDI Electric start Max. Power: 5HP/6000r/min Compression ratio: 7:1 Total  Rotational Transmission ratio: 16:1 Starting: Electric Start and Pull Start Gas Tank...

Model 152F-3Type: Single Cylinder 4 Stroke OHVDisplacement: 79.4cm3Bore X Stroke: 52 X 37.4Power Output: 1.1kw/3600RPmMax Torque: 3.1nm / 3240RPMFuel Consumption: 450G/KWHCooling system: Forced airHorsepower: 3.0PTO Shaft: Rotation CounterclockwiseDry weight: 9.2Kg

Displacement: 49ccCentrifugal Reduction Dry ClutchWeight: 3.8kgSingle cylinder 2 stroke Bottom Mounting Distance (Width): 85mmBottom Mounting Distance (Length): 67mmStart Mode: Hand pull starter 6T sprocket High performance cylinder head, plug, powder coated metal...

Displacement: 49ccCentrifugal Reduction Dry ClutchWeight: 3.8kgSingle cylinder 2 stroke Bottom Mounting Distance (Width): 85mmBottom Mounting Distance (Length): 67mmStart Mode: Hand pull starter 6T sprocket High performance cylinder head, plug, powder coated metal...

Displacement: 49ccCentrifugal Reduction Dry ClutchWeight: 4.6kgSingle cylinder 2 stroke Bottom Mounting Distance (Width): 85mmBottom Mounting Distance (Length): 67mmStart Mode: Hand pull starter T8F Sprocket

Displacement: 49ccCentrifugal Dry ClutchWeight: 3.2kgSingle cylinder 2 stroke Bottom Mounting Distance (Width): 85mmBottom Mounting Distance (Length): 67mmStart Mode: Hand pull starter 25H - 7 teeth Sprocket

Brand: HUASHENG 142F  Single cylinder, air-cooled, 4 strokeDisplacement: 49ccIgnition: C.D.I. ignitionMax.output:1.2KW @ 6800rpmMax.torque: 2.0NM @ 4500rpmEconomy: 100 km/3.5 litre fuelMax speed: 40km/hFuel tank: 2.5 litresEngine Weight: 5.5 kg

49cc single cylinder, air-cooled, 2-stroke    Fuel: 25:1 gasoline / engine oil mixPiston Diameter: 44MMTop Mounting Brackets: 11cm Bottom Mounting Brackets: 10.3cm Top Through Hole Diameter M.B.: 0.161" Bottom Through Hole Diameter M.B.: 0.245" Exhaust Diameter:...

Water cooler dimensions: 320mm x 202mm x 115mm Lower mounting hole distance (left to right) 70mm Top center mounting point  Thermo fan and radiator bottle setup Tubing and fittings included...

Cooler dimensions: 270mm x 170mm x 28mm Mounting hole distance (left to right) 155mm Mounting hole distance (top to bottom) 193mm    

Cooler dimensions: 270mm x 170mm x 28mm Mounting hole distance (left to right) 155mm Mounting hole distance (top to bottom) 193mm Thermo fan mounting distance 165mm  

Air filter upgrade - Oversized POD setup Works with factory carburettor - Maximise airflow Application: 5.5 - 7HP Stationary engines Mount hole distance - approx. 43mm

Aftermarket performance kit for 5.5 - 7HP Stationary engines Aftermarket performance carburettor Mount hole distance - approx. 42mm PZ19 (19mm) Carburettor Adapter

Application: 5HP - 6.5HP   (GX140 - GX200) • Input Shaft: 20mm Diameter, 50mm Long• Output Shaft: 20mm Diameter, 50mm Long• Keyway: 5mm   Precision machines aluminium die cast housing Standard...

Application: 8HP - 13HP   (GX240 - GX390) • Input Shaft: 25mm Diameter, 60mm Long• Input Shaft Keyway: 7mm• Input Mounting Holes: 90mm Square• Output Shaft: 22mm Diameter, 50mm Long• Output...

Shaft - approx. 3/4" (19mm) Cog - 420 pitch / 10T 

Shaft - approx. 1" (25.4mm) Cog - 428 pitch / 12T

Shaft - approx. 1" (25.4mm) Cog - 420 pitch / 14T

17 Teeth 5:1 Reduction (Automatic)  Mounting hole distance - approx. 70mm T8F cog Clutch diameter: 75mm Clutch thickness: 17mm  Shaft fitment: 11.50 - 13.50mm (Tapered)   

17 Teeth 5:1 Reduction (Automatic)  Mounting hole distance - approx. 70mm T8F cog    

14 Teeth 3:1 Reduction (Automatic)  Mounting hole distance - approx. 70mm T8F cog    

 Clutch diameter: 75mm Clutch thickness: 17mm  Shaft fitment: 11.50 - 13.50mm (Tapered)  No Key way    

  Clutch diameter: 75mm Clutch thickness: 17mm  Shaft fitment: 11.50 - 13.50mm (Tapered)     

17 Teeth 3:1 Reduction (Automatic)  Mounting hole distance - approx. 70mm T8F cog Clutch diameter: 75mm Clutch thickness: 17mm     

14 Teeth 3:1 Reduction (Automatic)  Mounting hole distance - approx. 70mm T8F cog    

Length of muffler (body) - approx. 220mm Overall length - 350mm Fit for: 49cc - 80cc Applications

Length of muffler (body) - approx. 220mm Diameter mount - 38mm  Comes with muffler clamp

Length of muffler (body) - approx. 220mm Diameter mount - 38mm  Comes with muffler clamp

Length of muffler (body) - approx. 220mm Diameter mount - 38mm  Comes with muffler clamp

Length of muffler (body) - approx. 220mm Diameter mount - 38mm  Comes with muffler clamp

Length of muffler (body) - approx. 520mm Muffler diameter - 100mm Distance mounting holes - 68mm  Comes with muffler clamp

Length of muffler (body) - approx. 520mm Muffler diameter - 100mm Distance mounting holes - 68mm  Comes with muffler clamp

Length of muffler (body) - approx.440mm Muffler diameter - 90mm Distance mounting holes - 52mm  Comes with muffler clamp

Length of muffler (body) - approx.460mm Distance mounting holes - approx. 52mm  Comes with muffler clamp

Length of muffler (body) - approx.460mm Distance mounting holes - approx. 52mm  Comes with muffler clamp

Length of muffler (body) - approx.460mm Distance mounting holes - approx. 52mm  Comes with muffler clamp

Length of muffler (body) - approx.460mm Distance mounting holes - approx. 52mm  Comes with muffler clamp

Length of muffler (body) - approx. 290mm Diameter of mounting hole - approx. 32mm 

Length of muffler (body) - approx. 200mm Diameter of mounting hole - approx. 28mm  Comes with muffler clamp 

4 Mount Diameter - approx. 152mm Mounting hole distance - approx. 115mm 

2 Mount Diameter - approx. 140.65mm Mounting hole distance - approx. 155.75mm 

Diameter - approx. 210mm Mounting hole distance - approx. 152mm 

Mounting hole distance - approx. 97mm Dimension of petrol tank (L x H x W) - 235mm x 105mm x 70mm

Dimensions (L x H x W) - 150mm x 90mm x 60mm

Fit for 43cc / 47cc / 49cc

Fit for 49cc quad bike Distance of mounting holes - approx. 138mm

Fit for 43cc / 47cc / 49cc Distance of mounting holes - approx. 67mm

6 Teeth Fits T8F chain Mounting hole distance - approx. 72mm Dry clutch

7 Teeth Fits T8F chain Mounting hole distance - approx. 72mm Dry clutch

7 Teeth Fits 25H chain Mounting hole distance - approx. 72mm Dry clutch

Fits GY6 125cc-150cc engines 

Fits GY6 125cc-150cc engines 

Fits GY6 125cc-150cc engines 

Fits GY6 125cc-150cc engines

Distance between mounting holes - approx. 50mm Fits 150cc-250cc engines

Distance between mounting holes - approx. 50mm Fits 90cc-140cc engines

Distance between mounting holes - approx. 52mm Fit for 49cc

Standard spark plug cap Fit for: 4 stroke engines 80 - 300cc

Quantity: 1pcs Charging coil - Battery / Lights etc.  Application - GX160/GX200/GX240/GX270

Intake - 18mm

Complete Torque converter kit  Suits standard 19.05mm (3/4”) drive shaft 5/8” bore driven pully 6” Diameter Drive Belt: 3/4″ Top Width – Asymmetrical Keyway 5mm Aluminium mounting back plate +...

Ignition timing pickup coil Lead length 210mm Fit for Honda GX160 GX200 GX270 GX390 / Chinese stationary engines

Exhaust muffler w/ heat shield  Net weight 1100g Colour black   Dimensions:  340mm x 110mm x 90mm

Exhaust muffler w/ heat shield  Net weight 1100g Colour black   Dimensions:  340mm x 110mm x 90mm

Complete air filter housing and carburetor mount Foam filter and fittings included Fit for 200cc engines 

Fit for our 270cc 9HP engines  Also suitable for: Honda GX270 / GX390 and Chinese Stationary engines

Shaft - approx. 19mm Cog - 428 pitch / 12T

Shaft - approx. 19mm Cog - 420 pitch / 10T

Fit for - GY6 200cc and GY6 250cc

Fit for - GY6 125cc and GY6 150cc

Aluminium Radiator overflow bottle Red Dimensions (L x H x W) - 190mm x 205mm x 76mm Holds - approx. 800ml Includes: Adapter, Cooling hose, mounting brackets and screws  

Aluminium Radiator overflow bottle Blue Dimensions (L x H x W) - 190mm x 205mm x 76mm Holds - approx. 800ml Includes: Adapter, Cooling hose, mounting brackets and screws  

Aluminium Radiator overflow bottle Dimensions (L x H x W) - 195mm x 60mm x 60mm Holds - approx. 350ml Includes: Cooling hose, Fitting kit 

Aluminium Radiator overflow bottle Dimensions (L x H x W) - 170mm x 150mm x 100mm Holds - approx. 2.5L

Aluminium Radiator overflow bottle Dimensions (L x H x W) - 168mm x 165mm x 87mm Holds - approx. 1L

Fit for - GY6 50cc engine

Fit for - GY6 125cc engine

Fit for - GY6 150cc engine

Fit for - GY6 250cc engine

Fit for - YX 160cc engine

Fit for - YX 140cc engine

Fit for - Loncin 250cc and Loncin 300cc engines

Fit for - 50cc 2 stroke engines

Fit for - Lifan 125cc engines

Fit for - Zongshen 250cc engines, 250cc-300cc water-cooled engines

Fit for - Lifan 125cc engines Includes - O rings

Fit for - 50cc engines Includes - O rings

Fit for - 66cc 70cc 80cc engines

Fit for - Loncin 250cc 300cc engines

Fit for - Loncin 250cc 300cc engines

Fit for - 66cc 70cc 80cc engines Head gasket Intake gasket Exhaust gasket

Fit for - Lifan 138cc 140cc engines

Fit for - 200cc engines

Fit for - 250cc engines

Fit for - 43cc 49cc engines  

Fit for - 43cc 47cc 49cc engines  

Choke Mechanism: Manual - Hand OperatedOuter Diameter of Air Filter Connection Point (excluding lip): 38.28 mm / 1.51 inchesInternal Dimensions / Diameter of Fuel Chamber: 21.85 mm / 0.86 inchesWhich Air Filter Size...

Length - approx. 85mm Outside diameter - approx. 26mm

Pipe diameter: 32mm Flange diameter: 38.50mm Mounting hole distance at engine head: 44.50mm Overall length: 650mm Fit for: 125 - 180cc engines

Mounting hole distance - approx. 47mm Intake Diameter - approx. 16mm

Mounting hole distance - approx. 47mm Intake Diameter - approx. 17mm Air Filter Mount Diameter - approx. 32mm

Mounting hole distance - approx. 47mm Intake Diameter - approx. 18mm Air Filter Mount Diameter - approx. 32mm

Mounting hole distance - approx. 48mm Intake Diameter - approx. 19mm Air Filter Mount Diameter - approx. 35mm

Mounting hole distance - approx. 48mm Intake Diameter - approx. 20mm Air Filter Mount Diameter - approx. 32mm

Mounting hole distance - approx. 50mm Intake Diameter - approx. 21mm Air Filter Mount Diameter - approx. 36mm

Mounting hole distance - approx. 48mm Intake Diameter - approx. 26mm Air Filter Mount Diameter - approx. 36mm

Mounting hole distance - approx. 48mm Intake Diameter - approx. 30mm Air Filter Mount Diameter - approx. 44mm

Ignition Method: CDI Engine Type: Single Cylinder, 4-Stroke, 2-Valve Lubrication: Pressure/splash Cooling System: Water Cooled Fuel Supply: Carburetor Atomization Horsepower: 16.76HP/7500Rpm (12.5KW/7500Rpm) Starter: Electric starter Max.Torque: 17.6N.m/5500Rpm Transmission: CVT Min.Stable Idle Speed: 1450-1750r/min Clutch: Shoe-type Automatic Centrifugal Dry Clutch Cylinder Diameter:...

Shaft - approx. 19mm Cog - 35 pitch / 12T

Shaft - approx. 19mm Cog - 35 pitch / 15T

Shaft - approx. 3/4" (19mm) Cog - 420 pitch / 10T 

Quantity: 1pc Intake diameter: 35mm

Quantity: 1pc Intake diameter: 35mm

Quantity: 1pc Filter diameter: 42mm Adapter mounting hole distance: 40mm Application: 2 Stroke 49cc engine(s)

Quantity: 1pc Filter diameter: 54mm  

Quantity: 1pc Intake diameter: 32mm

Quantity: 1pc Intake diameter: 35mm

Replacement clutch Suits standard 19.05mm (3/4”) drive shaft Comet 219552 Manco 5957 Yerf Dog Q43201W

Torque converter cog 10T 428 Pitch 5mm Keyway Centre diameter - approx. 15mm

Repair / Rebuild Kit  Engine type: GY6 / 200cc Displacement  Bore Diameter: 62.48mm Piston Diameter: 62.44mm  Piston Height: 39.45mm Includes: Head Gaskets / Piston Rings / Piston Pin 

Shaft - approx. 16mm Cog - 35 pitch / 11T

Air filter housing for GY6 Engine setups (150cc, 200cc, 250cc)  Foam filter and fittings included Hose diameter: 42mm Overall length: 182mm

Engine Cylinder Barrel Bore 140cc DisplacementQuantity: 1pcBore Diameter: 55.90mmMounting hole distance (nearest) Approx. 50.10mm / 48.20mm Overall height: Approx. 99mm

Engine Cylinder Barrel Bore 140cc DisplacementQuantity: 1pcBore Diameter: 54.75mmMounting hole distance (nearest) Approx. 50.75mm / 47.60mm Overall height: Approx. 100.60mm

Engine Cylinder Barrel Bore 125cc DisplacementQuantity: 1pcBore Diameter: 54mmMounting hole distance (nearest) Approx. 51.90mm / 50.40mm Overall height: Approx. 92.25mm

Engine Cylinder Barrel Bore 125cc DisplacementQuantity: 1pcBore Diameter: 52.4mmMounting hole distance (nearest) Approx. 50.30mm / 47.60mm Overall height: Approx. 98.5mm

Engine Cylinder Barrel Bore 150 - 160cc DisplacementQuantity: 1pcBore Diameter: 59.80mmMounting hole distance (nearest) Approx. 57.80mm / 69.60mm Overall height: Approx. 90.50mm

Engine Cylinder Barrel Bore 150cc Displacement Application: GY6 Scooter / Buggy engineQuantity: 1pcBore Diameter: 57mmMounting hole distance (nearest) Approx. 53.40mm /53.60mm Overall height: Approx. 90.65mm

Engine Cylinder Barrel Bore 125cc Displacement Quantity: 1pcBore Diameter: 52.4mmMounting hole distance (nearest) Approx. 51.90mm /50.40mm Overall height: Approx. 98.20mm

Engine Cylinder Barrel Bore 150c DisplacementQuantity: 1pcBore Diameter: 56.50mmMounting hole distance (nearest) Approx. 50.60mm / 49.00mm Overall height: Approx. 97.40mm

Engine Cylinder Barrel Bore 125cc Displacement Application: GY6 Scooter / Buggy engineQuantity: 1pcBore Diameter: 52.30mmMounting hole distance (nearest) Approx. 53.50mm /53.30mm Overall height: Approx. 90.36mm

Engine Cylinder Barrel Bore 125cc Displacement Quantity: 1pcBore Diameter: 52.4mmMounting hole distance (nearest) Approx. 50mm /47.70mm Overall height: Approx. 98.50mm

Engine Cylinder Barrel Bore 47cc - 49cc Displacement Quantity: 1pcBore Diameter: 43.80mm

Engine Cylinder Barrel Bore 43cc - 49cc Displacement Quantity: 1pcBore Diameter: 40.50mm

Engine Cylinder Barrel Bore 43 - 49cc Displacement Quantity: 1pcBore Diameter: 40.50mm Complete Kit including Piston and Gastets(s)

Engine Rebuild Kit (Cylinder / Piston / Gaskets ) Application: GY6 125cc Displacement  DIAMETER OF BORE approx 52.22mm DISTANCE BETWEEN HEAD BOLTS (CENTRE HOLE TO CENTRE HOLE) CLOCKWISE EACH TWO...

Engine Rebuild Kit (Cylinder / Piston / Gaskets ) Application: 125cc Displacement (Dirt Bike, ATV Quad, Buggy) DIAMETER OF BORE approx 52.4mm DISTANCE BETWEEN HEAD BOLTS (CENTRE HOLE TO CENTRE...

Engine Rebuild Kit (Cylinder / Piston / Gaskets ) Application: 110cc Displacement (Dirt Bike, ATV Quad, Buggy) DIAMETER OF BORE approx 52.4mm DISTANCE BETWEEN HEAD BOLTS (CENTRE HOLE TO CENTRE...

Engine Rebuild Kit (Cylinder / Piston / Gaskets ) Application: 125cc Displacement (Dirt Bike, ATV Quad, Buggy) DIAMETER OF BORE approx 52.4mm DISTANCE BETWEEN HEAD BOLTS (CENTRE HOLE TO CENTRE...

Engine Rebuild Kit (Cylinder / Piston / Gaskets ) Application: 125cc upgrade to 138cc Displacement (Dirt Bike, ATV Quad, Buggy) DIAMETER OF BORE Approx. 54.03mm DISTANCE BETWEEN HEAD BOLTS (CENTRE...

Engine Rebuild Kit (Cylinder / Piston / Gaskets ) Application: 140cc (Dirt Bike, ATV Quad, Buggy) DIAMETER OF BORE Approx. 54.03mm DISTANCE BETWEEN HEAD BOLTS (CENTRE HOLE TO CENTRE HOLE)...

Engine Rebuild Kit (Cylinder / Piston / Gaskets ) Application: 140cc (Dirt Bike, ATV Quad, Buggy) DIAMETER OF BORE approx 54.75mm DISTANCE BETWEEN HEAD BOLTS (CENTRE HOLE TO CENTRE HOLE)...

Engine Rebuild Kit (Cylinder / Piston / Gaskets ) Application: 140cc (Dirt Bike, ATV Quad, Buggy) DIAMETER OF BORE approx 54.75mm DISTANCE BETWEEN HEAD BOLTS (CENTRE HOLE TO CENTRE HOLE)...

Engine Rebuild Kit (Cylinder / Piston / Gaskets ) Application: 150cc GY6 (ATV Quad, Buggy) DIAMETER OF BORE approx 57.04mm DISTANCE BETWEEN HEAD BOLTS (CENTRE HOLE TO CENTRE HOLE) CLOCKWISE...

Engine Rebuild Kit (Cylinder / Piston / Gaskets ) Application: 155cc  (Dirt Bike, ATV Quad, Buggy) DIAMETER OF BORE approx 59.78mm DISTANCE BETWEEN HEAD BOLTS (CENTRE HOLE TO CENTRE HOLE)...

Engine Rebuild Kit (Cylinder / Piston / Gaskets ) Application: 150cc 160cc  (Dirt Bike, ATV Quad, Buggy) DIAMETER OF BORE approx 59.78mm DISTANCE BETWEEN HEAD BOLTS (CENTRE HOLE TO CENTRE...

Engine Rebuild Kit (Cylinder / Piston / Gaskets ) Application: 150cc 160cc  (Dirt Bike, ATV Quad, Buggy) DIAMETER OF BORE approx 62.02mm DISTANCE BETWEEN HEAD BOLTS (CENTRE HOLE TO CENTRE...

Engine Rebuild Kit (Cylinder / Piston / Gaskets ) Application: 200cc GY6  (ATV Quad, Buggy) DIAMETER OF BORE approx 62.45mm DISTANCE BETWEEN HEAD BOLTS (CENTRE HOLE TO CENTRE HOLE) CLOCKWISE...

Engine Rebuild Kit (Cylinder / Piston / Gaskets ) Application: 190cc to 212cc (Dirt Bike, ATV Quad, Buggy) DIAMETER OF BORE approx 66.59mm DISTANCE BETWEEN HEAD BOLTS (CENTRE HOLE TO...

Dimensions:  290mm (l) x 330mm (w) x 65mm (h) Capacity Approx. 7L 

Dimensions:  325mm (l) x 165mm (w) x 65mm (h) Capacity Approx. 4L 

Capacity Approx. 5L Dimensions:  300mm (l) x 190mm (w) x 230mm (h)

Suitable for 3/4" or 1" shaft Forward Reverse gearbox is for go-karts, utility vehicles and other applications from 2HP to 13HP. It's lightweight, rugged gearbox that allows operator the selection...

Complete Torque converter kit  Suitable for 25.4mm (1”) drive shaft 1" bore Drive Clutch 5/8” bore driven pully 6” Diameter Drive Belt: 3/4″ Top Width – Asymmetrical Aluminium mounting back...

SKU:T084 Brand New Carby Carburetor Fit 43cc/49cc Mini PIT Dirt Pocket Bike Mini Quad ATV Pocket Rocket DIAMETER OF INTAKE approx 12mm DISTANCE BETWEEN MOUNT HOLES(centre hole to centre hole)...

SKU:T085 Brand New Bubble Carby Carburetor Fit 43cc/49cc Mini PIT Dirt Pocket Bike Mini Quad ATV Pocket Rocket DIAMETER OF INTAKE approx 15mm DISTANCE BETWEEN MOUNT HOLES(centre hole to centre...

SKU:T133 Brand New 15mm Carby Carburettor Stationary Engine Esky Go Kart Dune Buggy Generator DIAMETER OF THEINTAKE HOLES approx 15mm DISTANCE BETWEENINTAKE MOUNTING HOLES (HOLE CENTRE TO HOLE CENTRE) approx...

SKU:T148 Brand New Carby Carburetor Fit 49cc 4 Stroke 142F Motorised Motorized Bicycle Engine Mini PIT Dirt Pocket Bike DIAMETER OF THE INTAKE HOLES approx 15mm DISTANCE BETWEEN INTAKE MOUNTING...